This is an old revision of the document!


FIXME

Test_1

App: User interface (UI), Views, Elements, Follow mode, Crosshairs, Screenshot, Overview

App Version 2.0.x (and 1.x)
The information in this description refers to the mentioned version. Kurviger Pro 1.x is missing some of the things described here. More recent versions of the app (and 1.x) may differ from this description. Nevertheless, the information described here should help to make it easier to use even these apps. The information is without guarantee.

Next topic: App: Map, POIs, Bookmarks, Address, Coordinates

Operating guide for the Kurviger app

The app Kurviger is a great tool to create routes, to load, save, display and share routes with friends. You can also explore areas with or without a route in follow mode.
With Subscription you have more possibilities (see below).
The app can be adjusted very flexibly to the device and the needs of the user.
In order to use the app and the advantages of their settings without any problems, you should take a little time to get familiar with them. To get to know the app and as a guide, this Operating guide is available for you.

This Operating guide is divided into topic blocks. In addition to this topic block there are the following topic blocks:

  • Map, POIs, Bookmarks, Address, Coordinates
  • Route planning, Routing, Route, Instructions, Overlays, Track, Transfer, Waypoints
  • Kurviger Pro: Navigation, Auto-Zoom, Simulation, GPS Logging, Screen Lock, Rerouting, More, Offline use

To learn how to use the app without or with subscription, it is recommended to read this topic block as well as the topic blocks without Kurviger Pro annotation, for app with subscription additionally the topic block marked with “Kurviger Pro” if necessary.
Links to these topics of the Operating guide and further information about the Kurviger App can be found throughout this topic or at the end of the page.
The links to the respective topics are preferably grouped at the end of the page in order to avoid interrupting the description of individual facts and thus the flow of reading as much as possible. The additional info can then be reached in case of knowledge gaps under the given links.
It is recommended to read the blocks given above, then most of the link jumps will be unnecessary. In addition, problems with the app can be avoided and save trouble and inquiries in the forum.
In order to be able to read the guide like a book, links to the previous and / or next topic block are inserted at the beginning and at the end of the topic blocks.

The operation with the basic elements is described. Experienced users can partly deviate from this due to the flexibility of the app.

To get to know the app is recommended:

  • Internet connection should / must be available.
  • First read the “Getting started” guide (Link at the end of the page).
  • While reading this guide, practice with the app.

And now enjoy reading the docu and using the Kurviger App.



Interface (UI) of the Kurviger App

This section describes the app's UI (user interface) (appearance and elements) as well as some explanations of the operation and settings of the app with subscription. The app without subscription has not so much functions than with subscription. Therefore some things are described here that are not available in the version without subscription. Functions or Features of the app without subscription sometimes are marked with Free or FREE. Additional functions or features of the app with subscription often are marked with Pro or PRO. In the still usable app Kurviger Pro 1.x some of the features described here and marked with Pro or PRO are not available!

If the definitions or meanings of terms in Kurviger are not known, it is helpful to read them first.
See Links at the end of the page.

If you are patient, please read on to get to know the Kurviger App. For the very impatient, there is the “Getting Started” guide (Link at the end of the page). With it you can quickly gain first experiences with the Kurviger App. If you have any questions, you are welcome to read on here to get to know the Kurviger App and its operation a bit better.



Views and Modes of the Kurviger App

In the app there are different views and operating states. The individual views and states are called modes. The main modes are the main views Map Mode, Follow Mode and Navigation Mode. Additionally, there is the Navigation Simulation Mode.
Navigation Mode and Navigation Simulation Mode are available only in Kurviger Pro.
In the main modes, there are possible further modes for operation and/or calculation. Here you can learn something about them.


There are several ways to use the app:

Map View, Map Mode, Create Route Mode, Planning Mode:
op_app_001.jpg op_app_002.jpg (Pictures are only rough examples. Depending on settings, view may differ significantly.)
Location detection of the device switched ON or OFF.
The map view is the basis for route planning as well as the follow, navigation and navigation simulation view.
In this mode you can plan, import (load), export (save) routes.
The map can be moved or rotated manually (see “Gestures”, Links at the end of the page), but always stays in the same position until further manual movement.
op_app_009.jpg When the location detection is switched on, the location display may be outside the visible range (e.g. while driving). Therefore, while driving, this mode should not be used, but the Follow Mode (or in Kurviger Pro the Navi Mode). Follow Mode and Navi Mode see below.
In the view of Kurviger (Free) there is an advertising area at the top and the navigation button is eventually not shown.
Pictures: (Kurviger 1.x, to recognize at blue status bar, green in 2.x) Above left: Portrait Kurviger (Free) without location. Above right: Portrait Kurviger Pro with location. Below: Landscape Kurviger Pro with location at the right edge outside the visible area.
Follow View, Follow Mode: Follow the location.
op_app_004.jpg op_app_005.jpg (Pictures are only rough examples. Depending on settings, view may differ significantly.)
Location detection of the device must be switched on.
In this mode the map is automatically moved so that your position and direction of movement is visible. The map follows the location.
If you move the map manually, it will automatically be repositioned after a short time so that the location is within the visible area.
In this mode you can see where you are while driving. The course of the road and possible turns are displayed. You can explore an area without using a predefined route.
If a route or track is displayed, you can follow its path without instructions or guidance.
op_app_010.jpg Altitude and speed can be displayed (PRO).
In the view of Kurviger (Free) there is an advertising area at the top, the navigation button is eventually not shown.
Location button is marked in color (blue in 1.x, green in 2.x).
Pictures: (Kurviger 1.x, to recognize at blue status bar, green in 2.x) Above left: Portrait Kurviger (Free) without route. Above right: Portrait Kurviger Pro with route. Below: Landscape Kurviger Pro with route.
Switching on the Follow view: Long touch the Location Button, Short form: Location Button (Long).
Switching off the Follow view: Tap the Location Button, Short form: Location Button (Short).
More see below and at “Additional topics of the operating guide” (Links at the end of the page).
Navigation view, navigation mode (only in Kurviger Pro): Follow the location with guidance along a route
op_app_006.jpg op_app_007.jpg (Pictures are only rough examples. Depending on settings, view may differ significantly.)
Location detection of the device must be switched on. Route must be available.
In this mode the map is automatically moved so that your position and direction of movement is visible. The map follows the location. In addition, you will be guided along the existing route.
For this purpose, various display panels (areas) are shown for navigation; depending on the settings, voice guidance is also possible.
The distance and time to the destination or next via point are displayed.
Altitude and speed can be displayed.
op_app_011.jpg If you deviate from the route, a corresponding message is displayed and, depending on the settings, the route is recalculated.
Navigation button is marked in color (blue in 1.x, green in 2.x).
Pictures: (Kurviger 1.x, to recognize at blue status bar, green in 2.x) Above left: Portrait,on the route. Above right: Portrait, off the route, white Panel, Map color normal. Below: Landscape, on the route, Panel black, Map color dark.
The settings at Menu Button > Settings > Navigation > Navigation mode > must be setted to Normal.
Switching on the Navi view: Tap the Navigation Button, Short form: Navigation Button (Short).
Pause and Continue the Navigation: Tap the Navigation Button, Short form: Navigation Button (Short).
Switching off the Navi view: Long touch the Navigation Button, Short form: Navigation Button (Long).
More see “Additional topics of the operating guide” (Links at the end of the page).
Navi simulation mode (only Kurviger Pro): Simulating the guidance along a route.
op_app_008a.jpg op_app_008b.jpg (Pictures are only rough examples. Depending on settings, view may differ significantly.)
Location detection of the device switched ON or OFF. Route must be available.
In this mode navigation is simulated.
A fictitious location display is guided along the route. The turn-by-turn instructions are displayed.
If voice guidance is switched on, the turn-by-turn instructions are also given acoustically according to the settings.
The simulation speed can be specified as a multiple of the speeds of the route sections considered in the route calculation.
It is also possible to jump forth and back.
Graphics and function of the simulation play panels were modified from version 1.11 to version 1.13, further modifications are possible.
Pictures: (Kurviger 1.x, to recognize at blue status bar, green in 2.x) Left: Simulation not started or paused. Right: Simulation running.
The settings at Menu Button > Settings > Navigation > Navigation mode > must be setted to Simulation.
Switching on the Navi simulation: Tap the Navigation Button, Short form: Navigation Button (Short).
Switching off the Navi simulation: Tap the Navigation Button, Short form: Navigation Button (Short).
Move along the Route with Navi Simulation Play panels.
More see “Additional topics of the operating guide” (Links at the end of the page).

In addition to the main or view modes there are other modes in the app. These modes can be switched on and off e.g. with buttons or in the settings. They can be used in reasonable combination with the main modes. These modes are listed here as additional information, because in the forum from time to time a corresponding mode can be pointed out. So don't get confused.

Here is a list of various operating or editing modes (see below for additional information):

  • Light or Dark mode: Light, Dark for better readability of menus, dialogs and lists depending on ambient light or user preference.
  • Menu and dialog mode: A menu or dialog is displayed. Actions can be started or settings can be made.
  • Measuring mode: It is possible to measure the distance between two points with a measuring line (see below).
  • GPS logging mode (only Kurviger Pro): Traveled paths (tracks) can be recorded. When the mode is switched on, a panel is displayed in the upper right corner to switch recording on and off (and more).


Controls and actions of the Kurviger App

The app contains elements (e.g. button, map, menus, dialogs) with which you can operate it. This description shows you where the elements are, what they look like and what you can do with them.


Explanation to the descriptions in the following tables:
(optional)The corresponding element is displayed permanently, temporarily or not, depending on the setting and / or input.
Bold elements These elements can be used to trigger actions.
For more info on the elements and their actions, see also in this and in the other topics of the guide, Links at the end of the page
Screenshots: Samsung A3 (2017), 4,7 Zoll, 720×1280, Android 8.0, Kurviger Pro 1.11 to 1.14
UI Map mode, Planning mode:
op_app_012.jpg op_app_013.jpg
Pictures: (Kurviger 1.x, recognizable by blue status bar, in 2.x green) Left: No route, with POI. GPS Logging Panel is not visible. Right: With Route. GPS Logging Panel is visible (optional) (only in Kurviger Pro).
Elements in Map mode (possibly without location and / or route))
1) Map 1a) Scale (optional, and depending on the setting zoom level) 2) Location 3) Compass (optional)
4) Address lookup Button (optional) 5) Navigation Button (optional) (poss. only in PRO) 6) Menu Button (optional) .
7a) +Zoom Button (optional) (and depending on the setting zoom level) 7b) -Zoom Button (optional) 7a,b) are only visible for a short time after touching the map 8) Location Button (optional)
9) Bookmark (optional) 10) POIs (map levels, optional) 11) GPS logging Panel (optional) (PRO) _ ) GPS track (optional) (PRO) (without fig.)
12) Route (optional) 12a) Route direction arrow (optional) 13a,b,c,d) Waypoints (WP) (optional) 14) Instruction point (optional)
13a) WP Start (optional) 13b) WP End (optional) 13c) WP Via point (optional) 13d) WP Shaping point (optional) (without fig.)
For more info on the elements and their actions, see also in this and in the other topics of the guide, Links at the end of the page
UI Follow mode:
op_app_014.jpg op_app_015.jpg
Pictures: (Kurviger 1.x, recognizable by blue status bar and blue location button, in 2.x green) Left: Without route Right: With route
In Kurviger PRO 1.x some of the elements listed here are missing. “Without fig.” means: not numbered in pictures or missing.
Elements in Follow mode (possibly without route)):
1) Map 1a) Scale (optional, and depending on the setting zoom level) 2) Location 3) Compass (optional)
4) Address lookup Button (optional) 5) Navigation Button (optional) (poss. only in PRO) 6) Menu Button (optional) .
7a) +Zoom Button (optional) (and depending on the setting zoom level) 7b) -Zoom Button (optional) 7a,b) are only visible for a short time after touching the map 8) Location Button (optional)
9) Bookmark (optional) (without fig.) 10) POIs (map levels, optional) (without fig.) 11) GPS logging Panel (optional) (PRO) _ ) GPS track (optional) (PRO) (without fig.)
12) Route (optional) 12a) Route direction arrow (optional) 13a,b,c,d) Waypoints (WP) (optional) 14) Instruction point (optional)
13a) WP Start (optional) 13b) WP End (optional) 13c) WP Via point (optional) 13d) WP Shaping point (optional) (without fig.)
20) Speed Panel (optional) (PRO) 21) Altitude Panel (optional) (PRO) _ ) Current time Panel (optional) (PRO) (without fig.) _ ) Battery level Panel (optional) (PRO) (without fig.)
For more info on the elements and their actions, see also in this and in the other topics of the guide, Links at the end of the page
UI Navigation mode (only Kurviger Pro 2.x; 1.x):
op_app_016.jpg op_app_017.jpg
Pictures: (Kurviger 1.x, recognizable by blue status bar and blue navigation button, in 2.x green) Left: On route Right: Off route
In Kurviger PRO 1.x some of the elements listed here are missing. “Without fig.” means: not numbered in pictures or missing.
Elements in Navigation mode:
1) Map 1a) Scale (optional, and depending on the setting zoom level) 2) Location 3) Compass (optional)
4) Address lookup Button (optional) 5) Navigation Button (optional) (poss. only in PRO) 6) Menu Button (optional) .
7a) +Zoom Button (optional) (and depending on the setting zoom level) 7b) -Zoom Button (optional) 7a,b) are only visible for a short time after touching the map 8) Location Button (optional)
9) Bookmark (optional) (without fig.) 10) POIs (map levels, optional) (without fig.) 11) GPS logging Panel (optional) _ ) GPS track (optional) (without fig.)
12) Route (required in navigation) 12a) Route direction arrow (optional) (without fig.) 13a,b,c,d) Waypoints (WP) (optional) (without fig.) 14) Instruction point (optional) (without fig.)
13a) WP Start (optional) (without fig.) 13b) WP End (optional) (without fig.) 13c) WP Via point (optional) (without fig.) 13d) WP Shaping point (optional) (without fig.)
20) Speed Panel (optional) 21) Altitude Panel (optional) _ ) Current timePanel (optional) (without fig.) _ ) Battery level Panel (optional) (without fig.)
15, 15a) Direction Panel (Off route beeline to the route continuation) 16) Second next turn Panel (optional) 17) Instruction Panel (optional) _ ) Street name Panel (optional) (Current street) (without fig.)
18) Distance Panel 19) Travel time Panel _ ) Speed limit Panel (optional) (without fig.) .
22) Off route Warning _ ) Speed limit Warning (optional) (without fig.) . .
For panels 11, 15 to 21 you can set color, transparency and font size.
For more info on the elements and their actions, see also in this and in the other topics of the guide, Links at the end of the page
UI Navi Simulation Mode (only Kurviger Pro 2.x; 1.x):
op_app_018.jpg op_app_019.jpg
Pictures: (Kurviger 1.x, recognizable by blue status bar and blue navigation button, in 2.x green) Left: Stopped (Paused) Right: Running (Screenshots: Kurviger Pro 1.11.10, graphics from S2 and S3 may be modified at your version)
Elements S1 - S4 (Simulation-Play-Panel) are only available in Navi Simulation Mode:
1) Map 2a) virtual location 12) Route 3) Compass (optional)
5) Navigation Button (optional) (poss. only in PRO) 6) Menu Button (optional) 8) Location Button (optional) .
S1) Start/Stop Simulation S2) To previous instruction point (short) S3) To next instruction point (short) S4) Speed faktor Panel (of simulation run)
S2) Back to the start (long) S3) Forward to the end (long) .
Note: In the navigation simulation, some of the elements displayed in the navigation may be missing.
For more info on the elements and their actions, see also in this and in the other topics of the guide, Links at the end of the page

Element Sample (No. in brackets refers to the above element identification)Element name and operation step. Short, Long: Touch accordingly.Triggered actions:
(Short) means short touch, (Long) means long touch
.
Common elements:
. . .
(1) Map (Short) > Fades in hidden buttons for a short time
Map (Long) > Opens menu to select different actions (e.g. set waypoints to create route from A to B. Or round trip).
. . .
(3) Compass (Short) > Opens a dialog for selecting the map orientation. If the app is in map, follow or navi mode, the setting is made for the respective mode.
Compass (Long) >
. . .
(4) Address Lookup Button (Short) > With Internet connections: Opens the address lookup dialog
Address Lookup Button (Long) >
. . .
(6) Menu Button (Short) > Opens the main menu. In the main menu, select further menus or settings.
Menu Button (Long) >
. . .
(7a) (7b) +Zoom Button, -Zoom Button (Short) > Zooming the map by one level
+Zoom Button, -Zoom Button (Long) > Zooming the map by several levels
+Zoom increases, -Zoom decreases the value of the zoom level. Increasing the value zooms further into the map and displays more details.
. . .
(8) Location Button (Short) > Positions the location in the visible area
Location Button (Long) > Switches from Map mode to Follow mode
(8) (Follow) (blue in 1.x, green in 2.x) Location Button (Short) > Switches from Follow mode to Map mode
Location Button (Long) >
. . .
Elements of a Route:
. . .
(12) Route (Short) > Shows route information as a notification
Route (Long) > Opens menu for action selection for the route
. . .
(13) Waypoint (Short) > Show/hide waypoint info
Waypoint (Long) > Opens menu for action selection to waypoint
. . .
(14) Instructionpoint (Short) > Show/hide instructionpoint info
Instructionpoint (Long) > Opens menu for action selection for the route or map
. . .
Elements in Follow and Navigation mode: (PRO 2.x; 1.x)
. . .
(20) Speed Panel Only display of the speed, otherwise no action.
(21) Altitude Panel Only display of the altitude, otherwise no action.

ATTENTION!
Operation with gloves requires special gloves and increased care!
For safety reasons and to avoid incorrect operation, operate the app only at safe stopping points!


Element Sample (No. in brackets refers to the above element identification) Element name and operation step. Short, Long: Touch accordingly. Triggered actions:
(Short) means short touch, (Long) means long touch
.
Elements of the GPS logging (only Kurviger Pro):
. . .
GPS logging panel only in Kurviger Pro. If you want to record the track of your ride with the GPS logging panel, you have to set this before accordingly in Menu button > Settings > GPS logging > GPS logging [x]!
(11) GPS-Logging Panel (Short) > Start or stop the recording. In case of distance in the display a dialog for selection of different actions is opened.
GPS-Logging Panel (Long) >
(11)
Displayed GPS: No track is currently recorded.
Displayed Distance: Distance indicates the length of the currently recorded track.
(11) Recording is off.
(11) Recording is on.
. . .
Elements for Navigation and Navi-Simulation (only Kurviger Pro):
. . .
Navigation button, navigation mode and navi simulation mode only in Kurviger Pro. If you want to change the navigation mode or navi simulation mode, you have to set this before in Menu Button > Settings > Navigation > Navigation mode accordingly!
(5) (Off) Navigation Button (Short) > Switches the Navigation mode or the Navi Simulation mode on.
Navigation Button (Long) >
(5) (On) (blue in 1.x, green in 2.x) Navigation Button (Short) > In Navi mode: Pauses the navigation.
In Navi simulation mode: Ends the navi simulation.
Navigation Button (Long) > Ends the navigation or navi simulation.
(5) (Pause) (blue in 1.x, green in 2.x) Only in navigation mode
Navigation Button (Short) > Continues the navigation.
Navigation Button (Long) > Opens dialog to end the navigation.
. . .
Elements in Navigation and Navi-Simulation (only Kurviger Pro):
. . .
(15) Direction and Distance Panel (Short) > Opens Quick Access menu for action selection for navigation
Direction and Distance Panel (Long) >
. . .
(17) Instruction Panel (Short) > When voice guidance is switched on, repeats the instruction to the next instruction point by voice.
Instruction Panel (Long) >
This panel can be displayed or hidden. For individually desired announcements screen and this panel must be displayed and operable! Show or hide selectable with Menu button > Settings > Navigation > Show turn instructions [x]
. . .
(18) Distance Panel (Short) > Switching the display between destination and next via point and vice versa
Distance Panel (Long) >
. . .
(19) Time Panel (Short) > Switching the display between duration and arrival and vice versa
Time Panel (Long) >
. . .
(22) Off Route (Short) > If rerouting is switched off in settings, rerouting from location is started manually depending on the settings for online and/or offline routing.
Off Route (Long) >
. . .
Elements only in Navi Simulation Mode (only Kurviger Pro): (Simulation-Play-Panel)
. . .
(S1) Start/Stop Panel (Short) > Starting, stopping (pause) the navigation simulation
Start/Stop Panel (Long) >
. . .
(S2) Forward Panel (Short) > Jumping forward an instruction point
Forward Panel (Long) > Jumping to the destination or last information point before the destination
. . .
(S3) Back Panel (Short) > Jumping back an instruction point
Back Panel (Long) > Jumping to the start
. . .
(S4) Speed factor Panel (Short) > Dialog for setting the factor for simulation speed is opened. The panel is only displayed in the Navi Simulation mode.
Speed factor Panel (Long) >
Element is active, corresponding function can be triggered.
Element is inactive, there is currently no triggerable function.
At (S2) and (S3) the graphics from version 1.11 and 1.13 are shown above. Depending on the version, the graphics and related functions of the simulation play panels may still change. Please do not let this confuse you. Panel color and transparency are like navigation panels.

ATTENTION!
Operation with gloves requires special gloves and increased care!
For safety reasons and to avoid incorrect operation, operate the app only at safe stopping points!



The overview of the elements in the main views and their actions shows that you often open menus or dialogs from the interface. Also the bookmark, waypoint and turnpoint lists.

The menus and dialogs are used to start actions and make settings.
Lists are used to display the names of currently existing points and sometimes to start related actions.
They are revised from time to time as features are added and app operation is improved.
Examples: Menu, Dialog Example: List
(Pictures are only rough examples. Depending on settings, view may differ significantly. For actual view, content and language please consider texts in the guide and / or use app.)
Some of the lists contain a toolbar. Depending on the list and the toolbar it contains different icons. When tapping on the icons, an action is triggered.


The app offers the possibility e.g. to set the screen orientation and font size quite flexible. For example, you can use portrait format for the menus and dialogs, but landscape format for the tour in follow or navigation mode. There are many different setting options. An automatic change from portrait to landscape format or vice versa can be avoided. This way the app can be adapted to the owner's wishes.
There is a possibility of a fullscreen display.
The font size of the map as well as the menus and dialogs can be set separately.
The display size of symbols and panels can be partially adjusted.


For adjusting the screen orientation 2 dialogs are to consider.

Dialog to select the Screen orientation:

For the Kurviger App you can select the screen orientation:

  • Menu Button > Settings > Application > Screen orientation >

Dialog will be opened. Select the desired “Screen orientation” for the app.

You can select from:

  • System
  • Portrait
  • Landscape
  • Reverse portrait
  • Reverse landscape
  • Sensor

Once selected, the setting of “Screen orientation” is taken into account for the modes specified in the “Screen orientation mode”.

Dialog to select when the selected Screen orientation is used:

For the Kurviger App you can select when the screen orientation you have selected should be considered:

  • Menu Button > Settings > Application > Screen orientation mode >

Dialog will be opened. Select the desired mode.

You can select from:

  • Always
  • Navigation / Follow
  • Off

Once selected, the setting of “Screen orientation” is taken into account for the modes specified in the “Screen orientation mode”.


The app can be displayed in full screen mode. The Android displays such as battery status, time, etc. are then hidden.

You can select the full screen mode with:

  • Menu button > Settings > Application > Fullscreen mode >

Note:
Full screen mode is intended for very small screens.
In Full screen mode e.g. by mount clips or similar operation of the app can be hindered.


Font size for the map labels:

  • The font size setting affects the font size in the map.
  • The font size can be set in % of the standard font size:
    • Menu Button > Settings > Map > Font size >
  • Dialog will be opened. Set the desired font size and confirm with OK.

Font size for menus, dialogs and display panel:

  • The font size setting affects the font size in menus, dialogs and display panels. The app may have to be restarted.
  • The font size can be set in % of the standard font size:
    • Menu Button > Settings > Application > Font size (restart) >
  • Dialog will be opened. Set the desired font size and confirm with OK.
  • Change only takes effect after restarting the app.

The display size of some symbols on the map (e.g. fuel stations) can be adjusted.

Set the display size of the symbols in the map with:

  • Menu button > Settings > Map > Display size >

Dialog opens. Select the desired size and confirm with OK.


The size of the buttons and display panel can be selected.

  • The display size can be set in % of the default display size:
    • Menu button > Settings > Application > Display size (restart) >
  • Dialog opens. Set the desired display size and confirm with OK.
  • Change only takes effect after restarting the app.

The size of the display panel is automatically adjusted with its font size.

  • The font size can be set in % of the default font size:
    • Menu button > Settings > Application > Font size (restart) >
  • Dialog opens. Set the desired font size and confirm with OK.
  • Change only takes effect after restarting the app.

Depending on the font size and display size setting of the application, the effect on the display panel size may be barely noticeable.

The color of the display panels, their symbol and font can be selected.

  • The display color of the display panel can be selected:
    • Menu button > Settings > Application > Display color >
      • Dialog opens. Select the desired color and confirm with OK.
      • Note: When A value is set 0, the panels are displayed transparent without frame.
  • The display color of the symbol in the panel can be selected:
    • Menu button > Settings > Application > Icon color >
      • Dialog opens. Select the desired color and confirm with OK.
      • Note: Please, as Icon color do not select same color like Display color!
  • The display color of the font in the panel can be selected:
    • Menu button > Settings > Application > Font color >
      • Dialog opens. Select the desired color and confirm with OK.
      • Note: Please, as Font color do not select same color like Display color!

The App theme of menus and dialogs may be selected:

  • Menu button > Settings > Application > App theme (restart) >

Dialog opens. Select the desired App theme and confirm with OK.
Change only takes effect after restarting the app.



You can, for example, use the zoom button to more or less zoom into or out of the map. The map scale and the value of the zoom level can be made visible.
In Kurviger Pro there is an auto zoom function for the Follow and Navi mode.

Depending on the zoom level, for example more or less streets, POIs, details are displayed or not. At high zoom level more details are displayed than at low zoom level. +Zoom increases, -Zoom decreases the zoom level.

Display of map scale and zoom level

You can select display of map scale and zoom level with the map scale setting:

  • Menu Button > Settings > Map > Map scale >

Selectable is:

  • Normal (Shows map scale, shows zoom level at zoom buttons)
  • Advanced (Shows scale and zoom level in extended map scale)
  • Off (Does not show map scale, shows zoom level at zoom button)

Info to Kurviger Pro see according descriptions in the PRO topic at “Additional topics of the operating guide” (Links at the end of the page).

Units

In the app you can select the units of length, height and speed:

  • Menu button > Settings > Application > Units >

A dialog opens:

  • Title: Units
  • o Metric (m, km, km/h)
  • o Imperial (ft, mi, mph)
  • CANCEL

The selected setting is used for displaying the length, altitude and speed.



Depending on the user's preference, some controls can be displayed permanently, briefly or not at all.

Here is a description of the display options using the example of Kurviger Pro in Follow and Navigation mode:

Elements that can be shown or hidden
UI Follow mode UI Navi mode
op_app_014.jpg op_app_016.jpg
Pictures: (Kurviger 1.x, recognizable by blue status bar and blue location button or navigation button, in 2.x green)
In Kurviger PRO 1.x some of the elements listed here are missing. “Without fig.” means: not numbered in pictures or missing.
Elements (optional visible)
All modes: (map (1) and location (2) cannot be hidden)
(1a) Map scale (3) Compass . .
(4) Address lookup button (5) Navigation button (poss. only PRO) (6) Menu button .
(7a) +Zoom button (7b) -Zoom button (7a,b) are only visible for a short time after touching the map (8) Location button
(9) POI (optional in PRO) (10) Bookmark (11) GPS logging-Panel (only PRO) _ ) GPS track (only PRO)
12a) Route direction arrow 14) Instruction points . .
PRO: In Follow and Navi mode:
(20) Speed panel (21) Altitude panel (_) Current time panel (without fig.) (_) Battery level panel (without fig.)
PRO: In Navi mode (Direction panel (15), Distance panel (18), Travel time panel (19) cannot be hidden):
(16) Second next turn panel (17) Instruction panel (Turn instruction) (17a) Street name panel (actual street) (without fig.) (_) Speed limit panel (without fig.)
For more info on the elements and their actions, see also in this and in the other topics of the guide, Links at the end of the page

Showing the Map scale:

  • The Map scale (3) is continuously displayed without or with zoom level or not displayed.
    • Menu button > Settings > Map > Map scale >
      • Dialog opens. Select the desired option.

Showing the Compass:

  • The Compass (3) is displayed permanently or optionally hidden and displayed for a short time after briefly touching the map.
    • Menu button > Settings > Location > Hide compass [x]

Showing the Operation buttons:

  • The Zoom buttons (7a, 7b) are always displayed for a short time after briefly touching the map.
    • Map (Short) >
  • The buttons Address lookup (4), Navigation (5), Menu (6), Location (8) are displayed permanently or optionally hidden and displayed for a short time after briefly touching the map.
    • Menu button > Settings > Application > Hide Screen buttons [x]

Display of the route direction arrows and / or the turn instruction points:

  • On the one hand, the route direction arrows can be displayed on the route:
    • Menu button > Settings > Routing > Route direction [x]
  • On the other hand, the turn instruction points can be displayed on the route:
    • Menu button > Settings > Routing > Turn instruction nodes [x]

Showing bookmarks:

  • Menu button > Settings > Map > Bookmarks [x]
  • (For more info about bookmarks see related topic, link at the end of the page)

PRO: Showing selectable POIs (Map layers):

  • Pois (interesting places, e.g. fuel stations) may be selected at the map layers (only in PRO):
    • Menu button > Map > Map layers >
  • Dialog opens. Select the desired option(s) and confirm with OK.
  • (For more info about POIs see related topic, link at the end of the page)

PRO: Showing the GPS logging panel and / or of a logged track:

  • On the one hand, the GPS logging panel can be displayed:
    • Menu button > Settings > GPS logging > GPS logging (Pro) [x]
  • On the other hand, a recorded track can be displayed on the map:
    • Menu button > Settings > GPS logging > Map (Pro) [x]

PRO: Showing Speed and / or Altitude panel in Follow and / or Navi mode:

  • In Follow and / or Navi mode the Speed of the location may be displayed:
    • Menu button > Settings > Navigation > Speed (Pro) [x]
  • In Follow and / or Navi mode the Altitude of the location may be displayed:
    • Menu button > Settings > Navigation > Altitude (Pro) [x]

PRO: Showing current time and / or battery level panel in Follow and / or Navi mode:

  • In Follow and / or Navi mode the current time may be displayed:
    • Menu button > Settings > Navigation > Current time (Pro) [x]
  • In Follow and / or Navi mode the battery level may be displayed:
    • Menu button > Settings > Navigation > Battery level (Pro) [x]

PRO: Showing the Navigation panels:

  • The Direction and distance (15), Distance (18) and Time (19) panels are always displayed during navigation.
  • The panel Second next turn (16) (Preview) may optionally be displayed:
    • Menu button > Settings > Navigation > Second next turn (Pro) [x]
  • The panel Instruction (17) may optionally be displayed:
    • Menu button > Settings > Navigation > Turn instruction (Pro)[x]
  • The panel Street name (17a) may optionally be displayed:
    • Menu button > Settings > Navigation > Street name (Pro) [x]
  • The panel Speed limit (__) may optionally be displayed:
    • Menu button > Settings > Navigation > Speed limit (Pro) [x]


Using Crosshairs

E.g. for setting and moving waypoints and bookmarks automaticly a crosshairs tool is displayed. This enables exact positioning (see below).
The position of the corresponding point is only accepted and the selected action executed when it is confirmed in the tool.

Note for users with update from version 1.13 and earlier:
In the past, there was a so-called bubble mode for setting and moving points. This is no longer available.
Why is the bubble mode no longer available? The position could not be positioned exactly depending on the zoom level. This sometimes led to unwanted effects,e.g. irritating route course and turn instructions. More precise positioning is possible with the crosshairs. In addition, additional actions for waypoints are selectable and the maintenance of the app is more maintenance-friendly.


In the crosshairs tool, a crosshairs and buttons for canceling and confirming the position are displayed during positioning actions.
For positioning you can move the map under the crosshairs. The map can be zoomed. This way you can determine the position quite precisely.
1) Crosshairs Helps to find the position
2) Cancel Button > Action is canceled
3) Confirm Button > Position is accepted


Using Follow mode

In the Kurviger App (Free and Pro) there is the so-called follow mode or follow location mode. In this mode, access to the location must be enabled in the device. A route is not required, but may be available. The map is moved on the screen so that the location is automatically displayed in the visible area.

ATTENTION!
Operation with gloves requires special gloves and increased care!
For safety reasons and to avoid incorrect operation, operate the app only at safe stopping points!

UI Follow mode:
op_app_014.jpg op_app_015.jpg
Pictures: (Kurviger 1.x, recognizable by blue status bar and blue location button, in 2.x green) Left: Without route Right: With route
In Kurviger PRO 1.x some of the elements listed here are missing. “Without fig.” means: not numbered in pictures or missing.
Elements in Follow mode (possibly without route)):
1) Map 1a) Scale (optional, and depending on the setting zoom level) 2) Location 3) Compass (optional)
4) Address lookup Button (optional) 5) Navigation Button (optional) (poss. only in PRO) 6) Menu Button (optional) .
7a) +Zoom Button (optional) (and depending on the setting zoom level) 7b) -Zoom Button (optional) 7a,b) are only visible for a short time after touching the map 8) Location Button (optional)
9) Bookmark (optional) (without fig.) 10) POIs (map levels, optional) (without fig.) 11) GPS logging Panel (optional) (PRO) _ ) GPS track (optional) (PRO) (without fig.)
12) Route (optional) 12a) Route direction arrow (optional) 13a,b,c,d) Waypoints (WP) (optional) 14) Instruction point (optional)
13a) WP Start (optional) 13b) WP End (optional) 13c) WP Via point (optional) 13d) WP Shaping point (optional) (without fig.)
20) Speed Panel (optional) (PRO) 21) Altitude Panel (optional) (PRO) _ ) Current time Panel (optional) (PRO) (without fig.) _ ) Battery level Panel (optional) (PRO) (without fig.)
For more info on the elements and their actions, see also in this and in the other topics of the guide, Links at the end of the page

Show location in map, Switching on and off the Follow mode:

(8) Location-Button (Short) > Positions the location in the visible area
Location-Button (Long) > Switches from Map mode to Follow mode
(8) (Follow) (blue in 1.x, green in 2.x) Location Button (Short) > Switches from Follow mode to Map mode
Location Button (Long) >

When map was moved, in all modes you can show map with location in the visible area (location must be enabled in device settings):

  • Location Button (Short) >

If you are in map mode, you can switch to follow mode by long touching the location button (8).

  • Location Button (Long) >

The button (8) in follow mode is marked in different color (blue in 1.x, green in 2.x).

If you are in follow mode, you can switch off follow mode by briefly touching the location button (8).

  • Location Button (Short) >

You are then back in map mode. The location button (8) will then be displayed in the usual neutral color.

Enable and disable map rotation in follow mode:

(3) Compass (Short) > Opens a dialog to select the map orientation
Compass (Long) >

By touching the compass (3) you open a dialog to set the map orientation.

  • Compass >

In the dialog the following selections are available

  • Manual (The map is displayed vertically in north-south direction by default. It can be rotated manually (see “Gestures” in the Links at the end of the page). If the map is rotated, it will be displayed again in vertical north-south direction when tapping the compass.
  • GPS 2D .
  • GPS 3D .
  • Compass 2D .
  • Compass 3D .

With “Manual”, the map on the screen is by default aligned vertically in a north-south direction. For the selections marked with “2D” and “3D” the map rotates on the screen so that the direction of travel is (almost) always directed to the top edge of the screen. Try out the setting that you like best or that works best with your device.



Use of Measuring mode

In the measuring mode a measuring line is displayed. With this you can measure the distance between two points.
The length (distance of the points, bee line) and orientation of the line is displayed in a panel at the top right. The orientation is displayed as an angle relative to the starting point (to the north 0° or 360°).

Switching on the measuring mode:

  • Menu button > Tools > Measure >

Measure by moving the measuring points:

  • Touch start point (green) and / or end point (red) for a long time and move to the respective desired position.
  • During and after moving the measurement points, the associated measurement values (distance, orientation) are displayed at the top right of the associated measurement results panel.

After measuring, the measuring mode can be switched off.

Switching off the measuring mode:

  • Menu button > Tools > Measure >


Take a screenshot of the screen

If you want to take a screenshot (recording of the screen) in the Kurviger App, this is usually quite easy. To capture the current screen, all you have to do is this:

  • Menu Button > Tools > Screenshot >

The screenshot is created and the Android storage access framework is opened.

There you can rename the file that is automatically given a timestamp (year, month, day, time) as file name if necessary and save it in a folder of your choice.

Not all image layers are captured in the screenshot. For example, the buttons and compass are not shown in the screenshot. If you want a screenshot with all image layers, you have to take a screenshot with the device's own screenshot function.
Problems occur when you want to make a screenshot of a message. Since messages are automatically hidden after a short time, this does not work with the Kurviger Tool. So you have to take a screenshot of a message with the device's own screenshot function.
Screenshots created with the device's own function are not stored with the Android storage access framework, but automatically in a device-specific folder.



Keep screen on

In the app there is an option to leave the screen on if necessary. You can reach this setting with:

  • Menu button > Settings > Application > Keep screen on >

A dialog opens, title Keep screen on:

  • o Always (Screen always stays on when app is open)
  • o Navigation / Follow (Screen stays on in Navigation or Follow mode.)
  • o Off (Screen is turned off after a short time depending on device settings, can lead to app shutdown depending on device power management! See FAQ, link at the end of the page)
  • CANCEL

Kurviger Pro: For voice guidance, the setting “Off” may be possible or desired. This can reduce power consumption. Observe the energy management of the device! (See FAQ.)



Settings of the Kurviger App

The Kurviger App allows a lot of setting options in menus and dialogs.

  • This allows the app to be adapted to the device and the user's needs.
  • This makes the app very popular with experienced users.
  • A beginner may feel overwhelmed by the setting options at first. Therefore we recommend:
    • After installation, do not change any settings until you are familiar with the basic operation of the app, following the instructions in the documentation.
    • It is advisable not to try to use all the possibilities at first.
    • Only then adapt the app to your needs step by step by changing the settings.
  • In order to be able to use the app to its full extent, a certain learning process and practice is quite helpful.
    • Gain first experiences possibly for and / or during short trips or after-work rounds.
    • With a certain experience larger routes are possible with a lot of driving fun.

For support you can use this guide and other descriptions in this Wiki. Additional you can use the forum for more information.

The menus and dialogs for the app's settings are revised and supplemented from time to time. It is tried to incorporate the changes in this documentation. However, it may happen that the app is more up-to-date than the documentation.

In the app you can access the settings as follows:

  • Menu Button > Settings >

The above notation means: Touch the Menu button to open the main menu. Touch the Settings selection in the main menu to open the settings menu. There you can make further selections and finally change settings.

Different settings are possible for the following groups:

  • Location
  • Map
  • Routing
  • Navigation (Pro) (in version 2.x only with subscription)
  • Voice guidance (Pro) (in version 2.x only with subscription)
  • GPS logging (Pro) (in version 2.x only with subscription)
  • Application

Tapping the desired group opens the associated menu for selecting the various settings. Make the desired setting there.


The app can be customized to the device and user preferences by modifying the settings. The settings can be reset to the original state. In addition, the settings can be saved and reloaded. When saving, different file names can be used. For example, thus you can use different user settings.
Some settings only take effect after restarting the app.

Reset all settings:

You can reset all settings to the original state with:

  • Menu button > Settings > Application > Preferences (restart) > Reset >

Dialog opens

  • Title: Preferences
  • Reset preferences?
  • CANCEL
  • OK

When you confirm with OK, all settings are reset to their original state.

Export (save) settings:

You can save your settings with:

  • Menu button > Settings > Application > Preferences (restart) > Export >

The Android storage access framework will open. In it, you can save the desired pref file in the folder you want.
The name of the file is automatically a timestamp. You can rename it in the Android storage access framework before saving or later in the file browser of your device.

  • ATTENTION! When changing the file name in the input field DO NOT OVERWRITE THE FILE EXTENSION (e.g. .pref). The file extension must be preserved!

See also “Android storage access framework” more below.

Import (load) settings:

You can load saved settings with:

  • Menu button > Settings > Application > Preferences (restart) > Import >

The Android storage access framework will open. In it, in the folder you want you can select and import the desired pref file.
See also “Android storage access framework” more below.



Help

From time to time there may be questions about the operation of the Kurviger app. The app offers you a help.

Examples how to access the help: (Internet connection required)

Quick introduction to the App:

  • Menu Button > Help > Getting started >

Frequently Asked Questions:

  • Menu Button > Help > FAQ >

Access to the documentation:

  • Menu Button > Help > Documentation >

Access to the forum:

  • Menu Button > Help > Ask in forum >

No registration is required to read the Internet pages opened by the help.

Forum questions:

If you can't find the answer to your question in the documentation pages and the forum, you can describe your problem in the forum. To do so, you must register in the forum.
(Forum registration is also required if you are somehow registered with other Kurviger belongings.)

When writing in the forum please follow the forum guidelines. When asking polite and with description of the problem (with the terms commonly used in Kurviger), the forum people will try to help solve the problem in a relatively short time.

Wait for answer and possible questions in the forum. The answerers of your question are happy about a “Like” (little hearts) and a feedback in the forum, if your question was answered successfully or the problem was solved.

Please ask questions about possible problems with Kurviger in the forum and do not send them to a Kurviger e-mail address!
Questions to the e-mail address will not be answered for organizational reasons. Please do not misunderstand this with rudeness, lack of helpfulness or ignorance.

For questions in the forum, it is very helpful for answering your question if you provide the following information:

For questions to the app on your device:

Please provide information about the version of the app, Android, and device. You can view this information in the app and transcribe:

  • Menu Button > Settings > About > INFO >

Insert the details of the info at your question in the forum.

For questions, if the route calculation does not work as expected or in case of map errors:

Include a description of the problem and, if possible, a short link of the route when asking the question.

When the problem seems to be caused by a map error you don't have to make the steps described below for the whole route. Then set start before and end behind the section, where the problem is. For this route section please attach the short link when asking the question.

You can determine the short link for example as follows:

  • Menu Button > Share > Route > Notations >
    • In the opening window you will see the short link that starts with https:/ /kurv.gr/
    • Mark the entire short link including https:/ /kurv.gr/ and copy or transcribe
    • Close the window again

or (if forum visit is done with same device as app use):

  • Menu Button > Share > Route > Clipboard >
    • The short link that starts with https:/ /kurv.gr/ is available in the clipboard and can be transferred to the question by “Paste”.

Paste the (copied or transcribed) short link into your question in the forum without errors, pay attention to upper and lower case!



Android storage access framework

The Android Storage Access Framework (SAF) is a tool for importing (loading) and exporting (saving) files from the app. It can access app-independent folders on the device (internal and SD card) and files within them.

The Android storage access framework is opened from the app during the corresponding actions (e.g. import or export of route files). In the various topics of this operating guide, the opening of the framework is referred to in the respective actions.

ATTENTION: At some devices or Android versions there are problems with storage access to the SD card! Recommendation: To avoid such problems, do not save files on SD card, save them internally.

In the following some possibilities of the opened framework are described.

Rough overview. More detailed elaboration is still missing!

Views:

  • Tile view
  • List view

Folder selection:

  • change view if necessary (see Views)
  • internal folders selectable
  • SD card folders selectable
  • select desired folder

Import (load) a file:

  • select desired folder (see Folder selection)
  • tap desired file
  • Framework is closed
  • Action continues in Kurviger App with the selected file

Export (save) a file:

  • Input field (possibly preassigned with file name) and SAVE button are displayed
  • ATTENTION! When changing the file name in the input field DO NOT OVERWRITE THE FILE EXTENSION (e.g. .gpx, .kurviger, .pref). The file extension must be preserved!
  • select desired folder (see Folder selection)
  • Save file, 2 options (without, with overwrite)
  • A: File will not be overwritten
  • Change the file name in the input field, (if necessary,) confirm with SAVE.
  • If the file exists in the folder, it will not be overwritten, but a file with the same name will be added, but a number will be added behind the file (the file format).
  • Overwriting the existing file is thus not possible.
  • B: File optionally can be overwritten
  • Tap on the file in the folder (file name is transferred to the input field) and confirm with the SAVE button.
  • If the file exists in the folder, a Overwrite? dialog is displayed. Confirm with CANCEL or OK.
  • If confirmed with OK, the file will be overwritten.
  • Framework is closed
  • The work in the Kurviger app can be continued.


App Kurviger, upgrade

Kurviger App is only available for Android devices.

App Kurviger 2 (version 2.x) takes into account new Android rules and is a new concept with basic features free of charge and optional there can be used more features (PRO features) with an subscription for monthly or yearly fees.

The app Kurviger (Free) (version 1.x) is updated to the app Kurviger 2 (version 2.x). There the basic features can still be used for free.

The app Kurviger Pro (version 1.x) is maintained with its previous features until further notice. It can only be used and updated by its current users. New features will not be added in Kurviger Pro (1.x) but only in Kurviger 2.

Each app (Kurviger 2, Kurviger Pro 1.x) is an independent app and can be used independent from each other.

Features comparison of Kurviger website, app 1.x and 2.x is linked in the sidebar.

How do I get from the free basic features to the PRO features (App Kurviger version 2.x)?

Very easy!

  • Menue button > Subscriptions >

Then you can select your monthly or annually subscription. Then you are linked to Google Play to make the subscription contract using your Google account.

With the same Google account you can use the current subscription for its duration on other Android devices at no additional cost.

If you have more than one Google Account, you should remember which account you used to make the subscription! Only with this account you will be able to use the current subscription for its duration at no additional cost - e.g. on other devices!

How do I get from the PRO app (version 1.x) to the PRO features (version 2.x)?

There is no direct way from the PRO app (1.x). In the sidebar of this docu is a link to the Kurviger app in Google Play. Otherways in Google Play you have to look for Kurviger. There you can install the Kurviger app. Then you have Kurviger 2.x with basic features on your device. From this free app to the PRO features (version 2.x) you come like described above.

The app Kurviger Pro (1.x) remains installed and can be used until you uninstall it.



Map, POIs, Bookmarks, Address, Coordinates

The map data contains not only the streets but also other information. For example, various POIs.
You can adapt the map to your needs in various ways. Depending on the app (FREE, PRO (with PRO features)) e.g. map provider, map colouring, mountains, POIs from map, individually defined bookmarks.

Note:
For Kurviger PRO, the use of Kurviger offline maps is recommended. These are continuously updated and improved for Kurviger PRO.
They are only available in Kurviger PRO.

See “Additional topics of the operating guide:” Map, ...



Route planning, Routing, Route, Waypoints, Instructions, Transfer

At routing a route is created from the specification of waypoints and route options.

During routing (route calculation) the instruction points (instructions) are also determined.

For the route, waypoints and instruction points information displays are available in the form of pop-ups, lists and / or menus.
Actions are possible for some information displays.

Route transfer. A route can be imported, loaded, opened, exported, saved (or whatever you want to call it) and / or shared with others.

See “Additional topics of the operating guide:” Route planning, ...



Kurviger Pro: Navigation, Simulation, GPS Logging, Auto Zoom, Display Locking, Rerouting

In the App Kurviger Pro there are the possibilities for navigation, simulation of navigation, GPS logging, Auto Zoom.
You can activate a screen lock for the app, e.g. to prevent false activations by raindrops when it rains.
When leaving the route during navigation, there is the possibility of automatic or manually started route recalculation (rerouting).

See “Additional topics of the operating guide:” Kurviger Pro: Navigation, ...

Note:
Offline maps are recommended as they are constantly updated and improved for Kurviger.
If the Internet connection is poor or non-existent, the offline route calculation with the corresponding offline routing data can be used for rerouting in Navi mode.
Offline map data and offline routing data differ! They are in separate files!
Navi mode, offline maps and offline routing files are only possible in Kurviger Pro.



Internet connection, SIM card, online, offline use

Use of the app with an Internet connection is called online use; use without an Internet connection is called offline use.

If you use a smartphone or tablet without a SIM card, you usually do not have an Internet connection while driving. However, there are ways to connect the device without a SIM card to the Internet using devices with SIM cards. This description does not differentiate between devices with or without a SIM card, but rather whether the app is operated with or without an Internet connection.

It can happen that due to poor network in certain areas there is no Internet supply.

The app requires an Internet connection to plan a route with the Kurviger options. An internet connection is also required for address search, unlimited use of online maps, show mountains, import of route files for route calculation, and more.

The app is most convenient to use when an unlimited internet connection is available. You don't need to take any measures for offline use then. Therefore, Internet connection is recommended to get familiar with the app.

If the Internet connection fails, it is still possible under certain conditions to follow or navigate while driving. Previously shown online maps are usually still available in the app. Already opened routes can be used without route recalculation. Importing *.kurviger route files and using them is also possible without an Internet connection. Problems occur if the map data of the visited area is not available and/or a route recalculation is necessary. An overlay (e.g. track from a *.gpx or *.kurviger file) can be imported and displayed without an Internet connection.

With the App Kurviger Pro the above restriction also applies in offline mode. But this app offers additional options for offline use (see below).


Offline use is the operation without an Internet connection. If you are not connected to the Internet, some functions of the app may be missing or there may be problems that are not present with an Internet connection. For example, the following things will then no longer work or not work fully:

  • Display of online maps
  • Hillshading
  • Online route calculation with the Kurviger Route Options
  • Address lookup

For Offline use the app Kurviger Pro offers following possibilities:

  • Display of offline maps, which have to be saved before in the device (internal or SD card) for the desired area and then opened in the app.
  • Offline route calculation or offline route recalculation without using the Kurviger Route options (e.g. when deviating from the original route). To do this a Routing Service selectable in the settings can be used. See the descriptions in the “Additional topics of the operating guide”, which are linked at the end of the page.

Offline maps and Offline routing data are in different files! To be able to use both, you have to use for both for the desired area the corresponding files stored in the device, as described in “Additional topics of the operating guide”. See Links at the end of the page.

Thus, in Kurviger Pro the follow and navigation mode in offline use is possible nearly without restrictions.

Offline Address Lookup is not possible.

Procedure for using offline maps and offline routing data
See “Additional topics of the operating guide:” Kurviger Pro: Navigation, ..., Offline use



Thanks

This guide could only be written based on my own experience with the app, the instructions provided by the Kurviger developers boldtrn and devemux86, the changelog entries, and the contributions of some very helpful forum members.

Therefore thanks to

  • @devemux86, who developed the apps Kurviger (Free) and Kurviger Pro for us and continues to develop them for our requirements.
  • @boldtrn, who developed the Kurviger website for us and continues to develop it for our requirements.
  • Forum participants who have asked questions about the operation of the apps.
  • Forum participants who have provided and are providing solutions to the questions.
  • Forum participants who reviewed the draft of this guidance and made suggestions for improvement.
  • @boldtrn, who made this description possible through his advice in many conversations and discussions.


Links

  • playground/walterg/test_1.1622010682.txt.gz
  • Last modified: 2021/05/26 08:31
  • by walterg